Laminate Profiles

This is a process where we join two pieces of stone/ Tile and are stacked on top of one another and joined through the middle of the flat surface edge. This type of join is the safest and strongest structurally but can be more visually noticeable than a mitred join.

Laminate Full Bullnose

The Laminated Full Bullnose is a chunkier, more traditional profile for those who prefer a thicker and more prominent look on their tile edging.

As it’s name implies, this edge is achieved by cutting a strip of the same type of tile and laminating it (by clamping and gluing) to the underside of the edge of the tile.

When the epoxy glue has fully dried, the tile is then put through the bullnosing process and honed or polished as required.

You will need to allow for significantly longer lead times when ordering the Laminated Full Bullnose due to it’s labour intensive nature.

Show less

Laminate Round Edge

A Laminated Round Edge is a Half Bullnose with and additional piece of tile on the bottom to give the look of a thicker tile.

This give a classic round top with a square bottom look which is a contemporary, unobtrusive result being easy on the eye.

Laminated Flat Edge With Bevel

The Laminated Flat Edge provides a chunky square look finish to the edge of your pool or stair treads and is for those who want to get away from the rounded bullnosed appearance.

An extra piece of the same type of tile is glued to the underside of the tile edge to give it double thickness. Next the front face is machined to a perfectly flat finish as the name implies. Finally a small arras is cut along the top and bottom edges to finish it off with soft, safe edges.

The result is contemporary, unobtrusive and easy on the eye.

This profile is becoming increasingly popular with Queensland and northern N.S.W. pool builders who want to offer the most up to date designs to their clients.